INTEGRAL Galactic Bulge Monitoring: 1A 1742-294


Light Curves


1A_1742-294_isgri_lc_18-40.gif


1A_1742-294_isgri_lc_40-100.gif


1A_1742-294_jmx_lc_10-25.gif


1A_1742-294_jmx_lc_3-10.gif

The above count-rates can be compared with calibration data taken of the Crab.

Points are marked at the centre of the science window with horizontal error bars showing its total length (about 1800 seconds). Sources within the field of view but not detected or with negative detection significance are plotted as flux = 0 with no vertical error bar. In the ScW ID column, a suffix of ".000" indicates that plots were compiled from NRT data; ".001" indicates CONS data.



Data for Plots

Column format: MJD(days), +/-, Flux (counts/s), +/-, angle(isgri only), ScW ID

1A_1742-294_isgri_lc_18-40.all
1A_1742-294_isgri_lc_40-100.all
1A_1742-294_jmx_lc_10-25.all
1A_1742-294_jmx_lc_3-10.all



Source Visibility

Above graph shows angular distance of the source from the centre of the field of view. ISGRI FoV is a 29x29 degree square (central 10 degree square is fully coded); JEM-X FoV is truncated to a 10 degree diameter circle in this analysis (central 4.8 degree diameter circle is fully coded). Points below the horizontal line are visible in JEM-X. The level of systematic noise rises towards the edges of both instruments' FoVs (see Crab calibration data).


Go back
to Bulge home page